How to Install Common Harley Davidson Spare Parts
Maintaining and customizing your Harley Davidson motorcycle can be a rewarding experience, especially when you take on repairs and upgrades yourself.
At Hog Heaven Harley Spare Parts shop, we encourage riders to learn basic installation skills to save time and money while gaining a deeper connection with their bikes.
In this step-by-step DIY guide, we’ll walk you through how to install some of the most common Harley Davidson spare parts safely and effectively.
Tools You’ll Need Before you start, gather these essential tools to ensure a smooth installation process:
Socket wrench set- Screwdrivers (Phillips and flathead)- Allen wrenches- Torque wrench- Pliers- Lubricant or grease- Cleaning cloths- Service manual for your specific Harley model (for reference)
1. Installing a Replacement Air Filter
A clean air filter improves engine performance and fuel efficiency.
Here’s how to replace it:
- Step 1: Locate the air filter housing, usually on the right side of the engine.
- Step 2: Remove the screws or clips holding the cover using a screwdriver or Allen wrench.
- Step 3: Take out the old air filter and clean the housing with a cloth.-
- Step 4: Insert the new OEM air filter from Hog Heaven, ensuring correct orientation.
- Step 5: Reattach the cover and tighten screws securely, but do not overtighten.
2. Replacing Brake Pads
Brake pads are vital for safe stopping and should be checked regularly.
- Step 1: Raise your Harley off the ground using a jack or center stand.
- Step 2: Remove the wheel to access the brake caliper.
- Step 3: Detach the caliper bolts using a socket wrench and carefully remove the caliper.
- Step 4: Slide out the old brake pads and inspect the rotor for wear.-
- Step 5: Install new OEM brake pads and reassemble the caliper.
- Step 6: Reinstall the wheel and lower the bike.
- Step 7: Pump the brake lever several times to ensure proper pad positioning.
3. Changing Spark Plugs
Replacing spark plugs can improve engine start-up and combustion efficiency.
- Step 1: Locate the spark plugs on the engine cylinder heads.
- Step 2: Remove the spark plug wire boots by gently pulling.
- Step 3: Use a spark plug socket with extension to unscrew and remove the old plugs.
- Step 4: Check the gap on the new OEM spark plugs and adjust if necessary (refer to your manual).
- Step 5: Screw in the new spark plugs by hand to avoid cross-threading, then tighten with a torque wrench.
- Step 6: Reconnect the spark plug wire boots securely.
4. Installing Clutch or Brake Levers
Broken or worn levers can be replaced with these steps:
Step 1: Locate the lever assembly on your handlebar.
Step 2: Remove the mounting bolt and disconnect the cable or hydraulic line carefully.
Step 3: Slide out the old lever.
Step 4: Position the new OEM lever from Hog Heaven and reconnect the cable or line.
Step 5: Secure the lever with the mounting bolt and test for proper movement.
5. Replacing Your Drive Belt
A worn or damaged drive belt requires prompt replacement.
Step 1: Loosen the rear wheel axle and adjuster bolts to release belt tension.
Step 2: Slide the old belt off the sprockets.
Step 3: Install the new OEM drive belt, ensuring it aligns correctly on each sprocket.
Step 4: Adjust wheel position to apply correct belt tension (refer to specifications).
Step 5: Tighten all bolts securely and double-check belt alignment.
Safety Tips for DIY Installation
Always work in a well-lit, stable, and clean environment.
Use the right tools to avoid damaging parts or injuring yourself. Follow the instructions in your Harley owner’s manual carefully. Wear protective gear like gloves and eye protection.
When in doubt, consult a professional mechanic or contact Hog Heaven’s support team.
Why Choose Harley Davidson OEM Parts from Hog Heaven?
Using genuine OEM Harley Davidson spare parts ensures perfect fit, quality, and durability.
Hog Heaven offers a comprehensive range of authentic parts backed by expert support, making your DIY projects easier and more reliable.
Conclusion
Installing common Harley Davidson spare parts yourself is a fun and cost-effective way to maintain and customize your bike.
With this step-by-step guide, you can confidently replace air filters, brake pads, spark plugs, levers, and drive belts using quality OEM parts from Hog Heaven.
Get your hands on the right parts and tools today, and enjoy the satisfaction of keeping your Harley running strong on every ride.
